IPower Off-Grid Inverter

IPower series is a pure sine wave inverter which can convert 12/24Vdc into 220/230Vac. It has the characteristics of concise outline, compact size, high reliability, high efficiency, easy to install and operate and so on. The inverter applicable to household emergency lighting system, vehicle mounted system and small field power supply, etc.

Key words：

Off Grid Pure Sine Wave Inverter Off Grid Power Inverter Off Grid dc to ac inverter Off Grid Solar Inverter Off Grid Solar Power Inverter Pure Sine Wave Power Inverter Pure Sine Wave DC To AC Inverter

Whatsapp/Wechat:

008615168886891

Related Products

Product message

IPower Off-Grid Inverter

Product Description

IPower series is a general-purpose pure sine wave high-frequency inverter that converts system 12/24/48V DC power into 220/230V (or 110/120V) AC power; industrial-grade design, with wide operating range compared with civilian-grade design temperature range and high stability. This product is easy to install, easy to operate, simple in appearance and light in size. The input voltage range is wide, which can be used in solar energy and other fields. It is also suitable for occasions where DC power needs to be converted into AC power in the civil field, such as emergency lighting systems, vehicle systems, small field power systems and household power systems.

Features

• Safe design with electrical isolation of input and output
• Using SPWM technology, pure sine wave output
• Output voltage 220/230VAC (or 110/120VAC) can be set by DIP switch
• Output frequency 50/60Hz can be set by DIP switch
• LED lights indicate working status and fault status
• Low no-load losses
• The maximum output conversion efficiency can reach 95%① (rated voltage, pure resistive load)
• Input protection: undervoltage protection, overvoltage protection
• Output protection: overload, short circuit protection
• Over-temperature protection: temperature-controlled fan, over-temperature automatic shutdown
• USB charging function optional
• RS485 communication interface function optional ②
① The efficiency is measured under the conditions of IP1500 and above models with 220V output, ambient temperature of 25°C, rated input voltage, and pure resistance load.
② RS485 communication interface for IP1000 and above models is optional.

Technical Parameter

Parameter	IP350-11	IP350-12	IP350-21	IP350-22
Rated input voltage	12VDC		24VDC
Input voltage range	10.8～16VDC		21.6～32VDC
Input surge voltage	＜32VDC		＜44VDC
The output voltage	110VAC(±5%) 120VAC(-10%～+5%)	220VAC(±5%) 230VAC(-7%～+5%)	110VAC(±5%) 120VAC(-10%～+5%)	220VAC(±5%) 230VAC(-7%～+5%)
Output frequency	50/60±0.1Hz
Continuous output power	280W
Power output for 15 minutes	350W
Can withstand instantaneous shock power	750W
Applicable power factor	0.2～1（The number of VA is not greater than the continuous output power）
Output waveform	Pure sine wave
Output harmonic components	THD≤5%①	THD≤3%①	THD≤5%①	THD≤3%①
Maximum output efficiency	90%	91%	91%	92%
No-load current	＜0.7A		＜0.5A
USB output interface ②	5VDC/Max.1A
Direct-current input terminal diameter	Φ6mm
Dimensions（L×W×H）	214×105.5×57.7mm
Installation size	185.5×76.7mm
Mounting hole size	Φ4.2mm
Net weight	1.0kg

①Test conditions: input rated voltage, output rated power, pure resistive load;

②Conventional products do not have this interface, and this interface is an optional function.

Parameter	IP500-11	IP500-12	IP500-21	IP500-22
Rated input voltage	12VDC		24VDC
Input voltage range	10.8～16VDC		21.6～32VDC
Input surge voltage	＜32VDC		＜44VDC
The output voltage	110VAC(±5%) 120VAC(-10%～+5%)	220VAC(±5%) 230VAC(-10%～+5%)	110VAC(±5%) 120VAC(-10%～+5%)～+5%)	220VAC(±5%) 230VAC(-10%～+5%)
Output frequency	50/60±0.1Hz
Continuous output power	400W
Power output for 15 minutes	500W
Can withstand instantaneous shock power	1000W
Applicable power factor	0.2～1（The number of VA is not greater than the continuous output power）
Output waveform	Pure sine wave
Output harmonic components	THD≤5%①	THD≤3%①	THD≤5%①	THD≤3%①
Maximum output efficiency	91%	92%	91%	92%
No-load current	＜0.9A		＜0.5A
USB output interface ②	5VDC/Max.1A
Direct-current input terminal diameter	Φ6mm
Dimensions（L×W×H）	232.2×132×74.5mm
Installation size	205×102mm
Mounting hole size	Φ5.2mm
Net weight	1.7kg

①Test conditions: input rated voltage, output rated power, pure resistive load;

②Conventional products do not have this interface, and this interface is an optional function.

Parameter	IP1000-11	IP1000-12	IP1000-21	IP1000-22
Rated input voltage	12VDC		24VDC
Input voltage range	10.8～16VDC		21.6～32VDC
Input surge voltage	＜20VDC		＜44VDC	＜40VDC
The output voltage	110VAC/120VAC(±3%)	220VAC/230VAC (±5%)	110VAC/120VAC(±3%)	220VAC/230VAC (±5%)
Output frequency	50/60±0.1Hz
Continuous output power	800W
Power output for 15 minutes	1000W
Can withstand instantaneous shock power	1600W
Applicable power factor	0.2～1（The number of VA is not greater than the continuous output power）
Output waveform	Pure sine wave
Output harmonic components	THD≤5%①	THD≤3%①	THD≤5%①	THD≤3%①
Maximum output efficiency	92.5%	94.5%	92.5%	94.5%
No-load current	＜0.8A		＜0.5A
USB output interface ②	5VDC/Max.1A
RS485 communication interface②	5VDC/200mA
Direct-current input terminal diameter	Φ6mm
Dimensions（L×W×H）	298.3×231.5×98.5mm		284.7×231.5×98.5mm
Installation size	183×220mm		163×219.5mm
Mounting hole size	Φ5.5mm
Net weight	3.9kg		3.6kg

①Test conditions: input rated voltage, output rated power, pure resistive load;

②Conventional products do not have this interface, and this interface is an optional function.

Parameter	IP1500-11	IP1500-12	IP1500-21	IP1500-22
Rated input voltage	12VDC		24VDC
Input voltage range	10.8～16VDC		21.6～32VDC
Input surge voltage	＜20VDC		＜40VDC
The output voltage	110VAC(±3%) 120VAC(-7%～+3%)	220VAC(±5%) 230VAC(-7%～+5%)	110VAC(±3%) 120VAC(-7%～+3%)3%)	220VAC(±5%) 230VAC(-7%～+5%)
Output frequency	50/60±0.1Hz
Continuous output power	1200W
Power output for 15 minutes	1500W
Can withstand instantaneous shock power	2400W
Applicable power factor	0.2～1（The number of VA is not greater than the continuous output power）
Output waveform	Pure sine wave
Output harmonic components	THD≤5%①	THD≤3%①	THD≤5%①	THD≤3%①
Maximum output efficiency	93%		94%
No-load current	＜1.0A		＜0.6A
USB output interface ②	5VDC/Max.1A
RS485 communication interface②	5VDC/200mA
Direct-current input terminal diameter	Φ6mm
Dimensions（L×W×H）	326.12×231.5×98.5mm		284.7×231.5×98.5mm
Installation size	208×220mm		163×219.5mm
Mounting hole size	Φ5.5mm
Net weight	4.6kg		3.9kg

①Test conditions: input rated voltage, output rated power, pure resistive load;

②Conventional products do not have this interface, and this interface is an optional function.

Parameter	IP2000-21	IP2000-22	IP2000-41	IP2000-42
Rated input voltage	24VDC		48VDC
Input voltage range	21.6～32VDC		43.2～60VDC
Input surge voltage	＜40VDC		＜80VDC
The output voltage	110VAC(±5%) 120VAC(-10%～+5%)	220VAC(±5%) 230VAC(-10%～+5%)	110VAC(±5%) 120VAC(-10%～+5%)%)	220VAC(±5%) 230VAC(-10%～+5%)
Output frequency	50/60±0.1Hz
Continuous output power	1600W
Power output for 15 minutes	2000W
Can withstand instantaneous shock power	3200W
Applicable power factor	0.2～1（The number of VA is not greater than the continuous output power）
Output waveform	Pure sine wave
Output harmonic components	THD≤5%①	THD≤3%①	THD≤5%①	THD≤3%①
Maximum output efficiency	94%	95%	94%	95%
No-load current	＜0.6A		＜0.4A
USB output interface ②	5VDC/Max.1A
RS485 communication interface②	5VDC/200mA
Direct-current input terminal diameter	Φ6mm
Dimensions（L×W×H）	326.12×231.5×98.5mm
Installation size	208×219.5mm
Mounting hole size	Φ5.5mm
Net weight	4.6kg

①Test conditions: input rated voltage, output rated power, pure resistive load;

②Conventional products do not have this interface, and this interface is an optional function.

Working environment parameters

Working temperature	-20℃～+45℃
Storage ambient temperature	-35℃~ +70℃
Relative humidity	< 95%（No condensation）
Protection class	IP20
Altitude	＜5000m (For altitudes greater than 1000 meters, derating should be used in accordance with GB7260)

Other parameters

Dielectric strength

Withstand AC500V voltage between DC input and chassis for 1min
Withstand AC1500V voltage between AC output and chassis for 1min